Novel Therapy for Acquired Tracheomalacia with a Tissue-Engineered Extraluminal Tracheal Splint and Autologous Mesenchymal-Derived Chondrocytes

Abstract Introduction Acquired tracheomalacia (ATM) is characterized by a loss of structural strength of the tracheal framework, resulting in airway collapse during breathing. Near half of the patients undergoing prolonged invasive mechanical ventilation will suffer tracheal lesions. Treatment for ATM includes external splinting with rib grafts, prosthetic materials, and tracheal resection. Failure in the use of prosthetic materials has made reconsidering natural origin scaffolds and tissue engineering as a suitable alternative. Objective To restore adequate airway patency in an ovine model with surgicallyinduced ATM employing a tissue-engineered extraluminal tracheal splint (TE-ETS). Methods In the present prospective pilot study, tracheal rings were partially resected to induce airway collapse in 16 Suffolk sheep (Ovis aries). The TE-ETS was developed with autologous mesenchymal-derived chondrocytes and allogenic decellularized tracheal segments and was implanted above debilitated tracheal rings. The animals were followed-up at 8, 12, and 16 weeks and at 1-year postinsertion. Flexible tracheoscopies were performed at each stage. After sacrifice, a histopathological study of the trachea and the splint were performed. Results The TE-ETS prevented airway collapse for 16 weeks and up to 1-year postinsertion. Tracheoscopies revealed a noncollapsing airway during inspiration. Histopathological analyses showed the organization of mesenchymal-derived chondrocytes in lacunae, the proliferation of blood vessels, and recovery of epithelial tissue subjacent to the splint. Splints without autologous cells did not prevent airway collapse. Conclusion It is possible to treat acquired tracheomalacia with TE-ETS without further surgical removal since it undergoes physiological degradation. The present study supports the development of tissue-engineered tracheal substitutes for airway disease.

Funcionalização de matriz colágena estável em volume utilizando Fibrina Rica em Plaquetas injetável (i-PRF) para o tratamento de Recessão Gengival unitária / Volume-stable collagen matrix (VCMX) biofunctionalized wit injectable platelet-rich fibrin (i-PRF) for the treatment of single gingival recession: randomized clinical trial

Substitutos de enxerto de tecido conjuntivo têm sido amplamente utilizados para superar as limitações dos enxertos autógenos no tratamento de defeitos dos tecidos moles periodontais e peri-implantares. No entanto, o desempenho clínico desses biomateriais ainda é inferior. A biofuncionalização de matrizes colágenas usando fibrina rica em plaquetas injetável (i-PRF) foi proposta como uma estratégia para aprimorar a bioatividade e, portanto, a eficácia clínica desses substitutos mucosos. Desta forma, o objetivo deste estudo foi avaliar a eficácia do uso da matriz colágena estável em volume (FG) biofuncionalizada com i-PRF no tratamento de recessões gengivais unitárias (RGs) do ponto de vista clínico, estético e de parâmetros centrados no paciente. Para tal, foram selecionados 66 pacientes portadores de RGs unitárias RT1, os quais foram alocados aleatoriamente em um dos seguintes grupos: grupo CAF (n=22), retalho posicionado coronariamente (CAF); grupo CAF+FG (n=22), CAF associado à FG; e grupo CAF+FG+i-PRF (n=22), CAF associado à FG biofuncionalizada com i-PRF. Após 6 meses, os três grupos apresentaram taxas de recobrimento radicular significativas [CAF: 69,1% (2,02 ± 1,06 mm); CAF+FG: 67,44% (1,7 ± 0,81 mm) e CAF+FG+i-PRF: 64,92% (1,64 ± 0,80 mm), sem diferença entre os grupos (p=0,33). Os grupos que receberam os biomateriais forneceram um maior ganho em espessura de tecido queratinizado (ETQ) (CAF: 0,12 ± 0,2 mm; CAF+FG: 0,43 ± 0,24 mm; CAF+FG+i-PRF: 0,48 ± 0,25 mm; p=0,000). Não foram observadas diferenças significativas em termos de altura de tecido queratinizado em nenhum dos grupos e tempos avaliados (p>0,05). Todos os grupos apresentaram redução significativa da hipersensibilidade dentinária e melhorias nas condições estéticas (p>0,05). Também não foram observadas diferenças em termos de dor e morbidade pósoperatórias (p>0,05). Dentro das limitações do presente estudo, conclui-se que as três abordagens forneceram resultados semelhantes e satisfatórios após 6 meses de acompanhamento. A adição da FG, biofuncionalizada ou não com i-PRF, proporcionou benefícios adicionais em termos de ganho de ETQ. (AU)

Soft tissue graft substitutes have been widely used to overcome the limitations of autogenous grafts in the treatment of periodontal and peri-implant soft tissue defects. However, the clinical performance of these biomaterials is still inferior. The biofunctionalization of collagen matrices using injectable platelet-rich fibrin (i-PRF) has been proposed as a strategy to enhance the bioactivity and, therefore, the clinical efficacy of these biomaterials. Thus, the aim of this study was to evaluate the effectiveness of using biofunctionalized volume-stable collagen matrix (VCMX) with i-PRF in the treatment of single gingival recessions (GRs) from clinical, esthetic, and patient-centered parameters. For this purpose, 66 patients with single RT GRs were selected and randomly allocated to one of the following groups: CAF group (n=22), coronally advanced flap (CAF); CAF+VCMX group (n=22), CAF combined with VCMX; and CAF+ VCMX +iPRF group (n=22), CAF combined with biofunctionalized VCMX with i-PRF. After 6 months, all three groups exhibited significant root coverage rates [CAF: 69.1% (2.02 ± 1.06 mm); CAF+FG: 67.44% (1.7 ± 0.81 mm); and CAF+FG+iPRF: 64.92% (1.64 ± 0.80 mm), with no difference between the groups (p=0.33). The groups that received the biomaterials showed a greater gain in keratinized tissue thickness (KTT) (CAF: 0.12 ± 0.2 mm; CAF+FG: 0.43 ± 0.24 mm; CAF+FG+i-PRF: 0.48 ± 0.25 mm; p=0.000). No significant differences were observed in terms of keratinized tissue height in any of the groups and assessed time points (p>0.05). All groups showed a significant reduction in dentin hypersensitivity and improvements in esthetic conditions (p>0.05). No differences were also observed in terms of post-operative pain and morbidity (p>0.05). Within the limitations of this study, it is concluded that all three approaches provided similar and satisfactory results after 6 months of follow-up. The addition of VCMX, whether biofunctionalized or not with i-PRF, provided additional benefits in terms of keratinized tissue thickness gain. (AU)

Progress in the application of patch materials in cardiovascular surgery / 中南大学学报(医学版)

The cardiovascular patch, served as artificial graft materials to replace heart or vascular tissue defect, is still playing a key role in cardiovascular surgeries. The defects of traditional cardiovascular patch materials may determine its unsatisfactory long-term effect or fatal complications after surgery. Recent studies on many new materials (such as tissue engineered materials, three-dimensional printed materials, etc) are being developed. Patch materials have been widely used in clinical procedures of cardiovascular surgeries such as angioplasty, cardiac atrioventricular wall or atrioventricular septum repair, and valve replacement. The clinical demand for better cardiovascular patch materials is still urgent. However, the cardiovascular patch materials need to adapt to normal coagulation mechanism and durability, promote short-term endothelialization after surgery, and inhibit long-term postoperative intimal hyperplasia, its research and development process is relatively complicated. Understanding the characteristics of various cardiovascular patch materials and their application in cardiovascular surgeries is important for the selection of new clinical surgical materials and the development of cardiovascular patch materials.

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT-Raman spectroscopy / Cultivo de células-tronco mesenquimais de rato sobre arcabouços de PHBV-PCL: análise do meio de cultura condicionado por espectroscopia de FT-Raman

Abstract Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37oC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

Resumo As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (ε-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a análise. Não houve variações nas leituras entre as amostras estudadas, concluindo-se que a FT-Raman não atendeu às expectativas nas condições estudadas.

Adipose tissue-derived stem cells as a therapeutic strategy for enterocutaneous fistula: an experimental model study

ABSTRACT Purpose: Enterocutaneous fistula (ECF) is a condition in which there is an abnormal connection between the intestinal tract and the skin. It can lead to high morbidity and mortality rates despite the availability of therapeutic options. Stem cells have emerged as a potential strategy to treat ECF. This study aimed to evaluate the effect of adipose tissue-derived stem cells (ASC) on ECF in an experimental model. Methods: ECF was induced in 21 Wistar rats, and after one month, they were divided into three groups: control group (C), culture medium without ASC group (CM), and allogeneic ASC group (ASC). After 30 days, the animals underwent macroscopic analysis of ECF diameter and histopathological analysis of inflammatory cells, tissue fibrosis, and vascular density. Results: The study found a 55% decrease in the ECF diameter in the ASC group (4.5 ± 1.4 mm) compared to the control group (10.0 ± 2.1 mm, p = 0.001) and a 59.1% decrease in the CM group (11.0 ± 4.3 mm, p = 0.003). The fibrosis score in the ASC group was 20.9% lower than the control group (p = 0.03). There were no significant differences in inflammation scores among the three groups. Conclusions: This study suggests that ASC treatment can reduce ECF diameter, and reduction in tissue fibrosis may be a related mechanism. Further studies are needed to understand the underlying mechanisms fully.

Research progress in the role of mesenchymal stem cell sheets and their derivatives in bone defect repair / 中华创伤杂志

Bone defects are mostly caused by severe trauma, infection, tumor resection and congenital malformations, which adversely affect their health and quality of life. So far, the bone defects are mainly filled with autologous or allogeneic bone grafting, which has problems such as donor shortage, secondary bone injury and scarring. In recent years, the rise of bone tissue engineering has provided a new way for repair of bone defects, in which mesenchymal stem cell (MSC) sheets prepared by using the principle of tissue engineering can well solve the above problems of autologous or allogeneic bone grafting. With the development of preparation technology, new bone defect repair materials such as decellularized extracellular matrix (ECM) sheets and MSC/ECM clumps have been derived on the basis of MSC sheets. Therefore, the authors reviewed the preparation and the role of MSC sheets and their derivatives in bone defect repair, hoping to provide a reference for basic research and clinical treatment related to bone defect repair.

Application of three dimensional bio-printing materials for tissue engineering tracheal grafting / 中华器官移植杂志

Currently three dimensional bio-printing technology has become one of the hot topics for tissue engineering tracheal grafting.Different biomaterials have their own performance advantages in the preparation and regeneration of tracheal scaffolds.It is particularly imperative to seek natural or polymeric materials with excellent profiles of printability, structural stability and biocompatibility to enable neo-cartilage formation, neo-epithelialization and neo-vascularization of tissue engineering trachea grafting.This review summarized the shortcomings and challenges of classifying and applying materials for three dimensional bio-printing tissue engineering trachea, aiming to provide new rationales for researches and applications of tissue engineering tracheal grafting.

The study of the whole bladder acellular matrix prepared by the perfusion decellularization system combined with the adipose-derived stem cells to construct the tissue engineering bladder / 中华泌尿外科杂志

Objective:To prepare the whole bladder acellular matrix (BAM) using the self-designed perfusion decellularization system, and evaluate the feasibility of constructing the tissue engineering bladder with the adipose-derived stem cells (ADSCs).Methods:This study was conducted from October 2020 to April 2021. The self-designed perfusion decellularization system was used, and four different decellularization protocols (group A, group B, group C and group D) were formulated, according to the flow direction of the perfusate and the action time of different decellularization solutions. Among them, the urethral orifice of the bladder tissue was used as the outflow tract of the perfusion fluid in groups A and B. The top of the bladder was cut off and used as the outflow tract of the perfusion fluid in groups C and D. In groups A and C, 1% Triton X-100 was treated for 6 h, and 1% sodium dodecyl sulfate (SDS) was treated for 2 h. In groups B and D, 1% Triton X-100 was treated for 7 h, and 1% sodium dodecyl sulfate (SDS) was treated for 1 h. In addition, the tissue in the normal bladder group was directly obtained from the natural bladder tissue, which did not require perfusion, cryopreservation and thawing. The fast and efficient decellularization protocol was screened out through HE, DAPI, Masson trichrome and Alcian Blue staining and quantitative analyses to prepare the whole bladder scaffold. The prepared BAM was used as the scaffold material, and the ADSCs were used as the seeding cells to construct the tissue engineering bladder. HE and DAPI staining were used to observe the distribution of ADSCs on the BAM.Results:HE and DAPI staining showed that there was no obvious nuclear residue in the group C. Masson trichrome and Alcian Blue staining showed that the collagen structure and glycosaminoglycan were well preserved in the group C. There was no significant difference in bladder wall thickness between the group C and the normal bladder group [(975.44±158.62)μm vs.(1 064.49±168.52)μm, P > 0.05]. The DNA content in the group C [(43.59 ±4.59) ng/mg] was lower than that in the normal bladder group, group A, group B and group D [(532.50±26.69), (135.17±6.99), (182.49±13.69) and(84.00±4.38)ng/mg], and the difference was statistically significant ( P<0.05). The collagen content [(10.98 ± 0.29)μg/mg] and glycosaminoglycan content [(2.30±0.18)μg/mg] in group C were not significantly different with those in the normal bladder group [(11.69±0.49) and (2.36±0.09)μg/mg, P>0.05]. Scanning electron microscopy showed that a large number of pore structures could be observed on the surface of the prepared BAM in groups A-D and were facilitated to cell adhesion. The isolated and cultured ADSCs were identified by flow cytometry to confirm the positive expression of CD90 and CD29, and the negative expression of CD45 and CD106. Live/dead staining and CCK-8 detection confirmed that the prepared BAM in the group C had no cytotoxicity. HE and DAPI staining showed that a large number of ADSCs were distributed on the surface and inside of the tissue engineering bladder. Conclusions:The whole bladder shape BAM prepared by the self-designed perfusion decellularization system could be used as the scaffold material for bladder tissue engineering, and the constructed tissue engineering bladder could be used for bladder repair and reconstruction.

Recent advances of acellular cartilage matrix in cartilage regeneration / 中华骨科杂志

Osteoarthritis is a common degenerative joint disease, and cartilage damage is often considered an early factor in irreversible joint degeneration. Repairing damaged cartilage remains a medical challenge due to its limited ability to self-repair and regenerate. In recent years, the application of tissue engineering strategies to treat cartilage defects has been recognized as an emerging therapeutic avenue. Acellular cartilage matrix (ACM) is an ideal material for cartilage repair and regeneration as it retains the extracellular matrix structure and bioactive components of natural cartilage, mimicking the extracellular environment of natural cartilage to the greatest extent. Type II collagen is the main type of hyaline cartilage and plays an important role in regulating the mechanical properties of cartilage tissue. It has been shown that type II collagen, growth factors and the hypoxic microenvironment play important roles in promoting cartilage regeneration. Type II collagen induces cell aggregation and chondrogenic differentiation in a specific way; Various growth factors contained in the ACM induce Sox9 expression and promote chondrogenic differentiation of stem cells; The hypoxic microenvironment upregulates the expression of type II collagen (COL2A1), Sox9 and maintains chondrocyte phenotype. In addition, ACM has been widely used in cartilage regeneration studies, either as a decellularized scaffold, hydrogel or 3D bioprinting technique for the repair of defective cartilage. Although the ACM-derived biomaterials discussed in this paper have many advantages, there are still some difficulties in their practical applications, such as loss of ACM components and reduced scaffold performance, which are still worth exploring in depth.

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT Raman spectroscopy / Cultivo de células-tronco mesenquimais de rato sobre arcabouços de PHBV-PCL: análise do meio de cultura condicionado por espectroscopia de FT-Raman

Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37ºC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (ε-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a [...].

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT-Raman spectroscopy

Abstract Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37oC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

Resumo As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a análise. Não houve variações nas leituras entre as amostras estudadas, concluindo-se que a FT-Raman não atendeu às expectativas nas condições estudadas.

Research progress of periodontal tissue regeneration by combined biomaterials of dental derived mesenchymal stem cells / 口腔医学

@#The ultimate treatment goal of periodontitis is the structural and functional regeneration of periodontium. However, existing methods for periodontal regeneration have difficulties in regenerating the hierarchical structure. Therefore, stem cell-based tissue engineering has attracted more and more attention for its advantages of self-renewal and multi-lineage differentiation potential. This review summarized the progress of research on periodontal tissue regeneration by combined biomaterials of dental-derived stem cells. It is pointed out that the application of autologous stem cell transplantation is limited by the donor source, and the subsequent research should focus on the development of multi-phase scaffold materials and the attempt to establish a stem cell bank.

Preparation and Performance of Three-Dimensional Silk FibroinScaffolds with Different Matrix Stiffness / 医用生物力学

Objective After hydrogen bonding between collagen ( COL) and silk fibroin ( SF ) at different concentrations, a composite scaffold with adjustable stiffness was prepared by combining with gel system, and its physical and chemical properties were characterized. Methods SF with different qualities was dissolved in sodium alginate (SA) solution, then COL solution at different concentration and calcium carbonate ( CaCO3 ) powder were added. The hydrogels of SC1, SC2, and SC3 groups were obtained by taking out the mixed solution and adding some gluconic acid lactone ( GDL) powder, and different SF scaffolds were obtained after freeze drying. Results The SF scaffolds with adjustable stiffness were successfully prepared. The compression moduli of SC1, SC2, and SC3 groups were (17. 31±2. 73), (24. 12±1. 81), (32. 54±1. 81) kPa, respectively. The innerstructure of the scaffolds was observed. From SC1 group to SC3 group, pores of the scaffolds were smaller and fewer, and hydrophilicity of the materials become better and better. Conclusions Three-dimensional ( 3D) porous scaffolds with different matrix stiffness can be prepared by changing the concentration of SF and COL solution. The concentration of SF and COL is proportional to the compression modulus, water absorption, water retention and swelling rate of SF scaffolds, while inversely proportional to porosity. The findings of this study are expected to provide theoretical guidance for construction of scaffolds with appropriate matrix stiffness for inducing osteogenic differentiation of mesenchymal stem cells

In vivo transplantation of eye organoids and application of tissue engineering scaffolds / 器官移植

Eye organoid refers to a structure that possesses resembling cell types and functions to intraocular tissues, which is induced by stem cells in vitro. Transplanting it into the body for eye repair and regeneration is one of the key research directions in regenerative medicine, which also provides a novel direction and strategy for the treatment of major blinding diseases. As a carrier of biological tissue or cell growth, tissue engineering scaffold could support in vivo transplantation of eye organoids and promote their maturation. Organic combination of eye organoids and tissue engineering is a critical approach to realize in vivo integration of eye organoids and reconstruct corresponding structures and functions. In this review, the latest research status of eye organoids and in vivo transplantation were summarized, and relevant studies of tissue engineering scaffold-assisted eye organoid transplantation were highlighted, aiming to provide ideas and reference for subsequent inter-disciplinary research of eye organoids and tissue engineering.

Progress of research on application of chondroitin sulfate in osteogenic repair materials / 口腔医学

@#Chondroitin sulfate is an important component of extracellular matrix (ECM) in animal and human body. In recent years, chondroitin sulfate has been proven to have potential efficacy in biomedical application and has been widely used in bone regeneration and osteogenesis, especially in craniofacial reconstruction and dental medicine. Research shows that chondroitin sulfate derivatives and chondroitin sulfate composite scaffolds have great potential in promoting osteogenesis and biomineralization. However, due to the variety of chondroitin sulfate and various application forms, study on its mechanism of osteogenic repair is still insufficient. In this paper, biological characteristics, bone regeneration and osteogenesis of chondroitin sulfate, its application in different biomaterial design and future prospect are discussed.

Research progress of polymer self-healing mechanism and its application in biomedicine / 药学学报

Polymer self-healing is mainly based on the molecular structure and interaction of polymers, and some need external stimulation, such as light, heat, pH, etc. In recent years, many studies have found that the self-healing properties of polymers can prolong the life of materials, while maintaining the mechanical properties of polymers after healing. According to the different action modes of polymer materials, it can be divided into autonomous self-healing and non-autonomous self-healing. Among them, autonomous self-healing mainly works through reversible covalent bonds (Schiff base bond, Diels-Alder reaction, hydrazide bond), reversible non-covalent bonds (hydrogen bond, metal-ligand coordination bond, electrostatic interaction, π-π stacking interaction, hydrophobic interaction) and a combination of the two interactions. Drug carriers with unique self-healing properties play an important role in the encapsulation and stable release of biomacromolecules. In this review, the self-healing mechanism of polymers and their applications in the field of biomedicine were briefly summarized and discussed.

A bibliometric and visualization analysis of stem cell therapies for periodontal tissue engineering / 口腔疾病防治

Objective@# To analyze the current status, hotspots, and trends in the field of stem cell therapies for periodontal tissue engineering based on bibliometric analysis.@*Methods @# The literature on stem cell therapies for periodontal tissue engineering in animal experiments and clinical studies was searched in the Web of Science core database up to December 31, 2021. The bibliometric analysis of the relevant literature data was carried out by using the "Bibliometrix" package of R language.@*Results @#A total of 304 articles were included, and the number of publications and the citation frequency are increasing. The number of related studies from China ranks first in the world with 166 publications; the institution with the largest number of publications is the Fourth Military Medical University; the author with the largest number of publications is Jin Y; and Tissue Engineering Part A had the most related publications. The hotspots of stem cell therapies for periodontal tissue engineering are mainly focused on tissue engineering and periodontal ligament regeneration, while the frontiers are mainly focused on exosomes, gold nanoparticles, and angiogenesis. @*Conclusion@#Research on stem cell therapies for periodontal tissue engineering continues to expand, and the academic influence is gradually increasing. Future research directions should focus on periodontal ligament regeneration, exosomes, gold nanoparticles and angiogenesis.

Research progress on in vivo models for stem cell-based pulp regeneration / 口腔疾病防治

@#Basic research on pulp regeneration requires in vivo experiments. The PubMed database was searched for in vivo models of stem cell-based pulp regeneration using the following keywords: "pulp regeneration", "stem cell" and "animal model". The retrieved models were classified into ectopic, semiorthotopic and orthotopic regeneration models and their characteristics and clinical values were reviewed. This literature review indicated that the ectopic regeneration model is the most widely used model for the simple steps. However, this model does not accurately capture clinical situations. The semiorthotopic regeneration model, which is an improvement of the ectopic regeneration model, can create a more realistic regeneration environment. The orthotopic regeneration model can simulate clinical procedures that more closely resemble application, but it is less commonly used for difficult operations and long experimental periods. The applicability of the above three animal models depend on the stage of the animal experiment: the ectopic regeneration model is suitable to test the regenerative effect and biocompatibility of the implant complex; the semiorthotopic regeneration model is suitable to more persuasively evaluate the regeneration effect of the implant complex; and the orthotopic regeneration model is suitable to confirm the regeneration effect and practicability of the regenerative implant complex prior to clinical study.

Effect of pH on the chelation between strontium ions and decellularized small intestinal submucosal sponge scaffolds / 北京大学学报(医学版)

OBJECTIVE@#To investigate the preparation of decellularized small intestinal submucosa (dSIS) sponge scaffolds with chelated strontium (Sr) ions at different pH values, and to select the appropriate pH values for synthesizing Sr/dSIS scaffolds using the physicochemical properties and biocompatibility of the scaffolds as evaluation indexes.@*METHODS@#(1) Sr/dSIS scaffolds preparation and grouping: After mixing dSIS solution and strontium chloride solution in equal volumes, adjusting pH of the solution to 3, 5, 7, and 9 respectively, porous scaffolds were prepared by freeze-drying method after full reaction at 37℃, which were named Sr/dSIS-3, -5, -7, and -9 respectively, and the dSIS scaffolds were used as the control group. (2) Physicochemical property evaluation: The bulk morphology of the scaffolds was observed in each group, the microscopic morphology analyzed by scanning electron microscopy, and the porosity and pore size determined, the surface elements analyzed by energy spectroscopy, the structure of functional groups analyzed by infrared spectroscopy, the chelation rate determined by atomic spectrophotometry, the water absorption rate detected by using specific gravity method, and the compression strength evaluated by universal mechanical testing machine.(3) Biocompatibility evaluation: The cytotoxicity and proliferative effect to bone mesenchymal stem cells (BMSCs) of each group were evaluated by Calcein-AM/PI double staining method.@*RESULTS@#Scanning electron microscopy showed that the scaffolds of each group had an interconnected three-dimensional porous structure with no statistical difference in pore size and porosity. Energy spectrum analysis showed that strontium could be detected in Sr/dSIS-5, -7 and -9 groups, and strontium was uniformly distributed in the scaffolds. Functional group analysis further supported the formation of chelates in the Sr/dSIS-5, -7 and -9 groups. Chelation rate analysis showed that the Sr/dSIS-7 group had the highest strontium chelation rate, which was statistically different from the other groups (P < 0.05). The scaffolds in all the groups had good water absorption. The scaffolds in Sr/dSIS-5, -7 and -9 groups showed significantly improved mechanical properties compared with the control group (P < 0.05). The scaffolds in all the groups had good biocompatibility, and the Sr/dSIS-7 group showed the best proliferation of BMSCs.@*CONCLUSION@#When pH was 7, the Sr/dSIS scaffolds showed the highest strontium chelation rate and the best proliferation effect of BMSCs, which was the ideal pH value for the preparation of the Sr/dSIS scaffolds.

Research status and prospect of tissue engineering technology in treatment of atrophic rhinitis / 中国修复重建外科杂志

OBJECTIVE@#To review the research progress of the feasibility of a new treatment method for atrophic rhinitis (ATR) based on tissue engineering technology (seed cells, scaffold materials, and growth factors), and provide new ideas for the treatment of ATR.@*METHODS@#The literature related to ATR was extensively reviewed. Focusing on the three aspects of seed cells, scaffold materials, and growth factors, the recent research progress of ATR treatment was reviewed, and the future directions of tissue engineering technology to treat ATR were proposed.@*RESULTS@#The pathogenesis and etiology of ATR are still unclear, and the effectiveness of the current treatments are still unsatisfactory. The construction of a cell-scaffold complex with sustained and controlled release of exogenous cytokines is expected to reverse the pathological changes of ATR, promoting the regeneration of normal nasal mucosa and reconstructing the atrophic turbinate. In recent years, the research progress of exosomes, three-dimensional printing, and organoids will promote the development of tissue engineering technology for ATR.@*CONCLUSION@#Tissue engineering technology can provide a new treatment method for ATR.